LED cabinet lighting is a very popular and practical lighting product that provides a better lighting effect and usage experience. However, if installed incorrectly, it can lead to a number of problems. Here is a simple led lighting solutions to help you install and use LED cabinet lighting properly.
Step 1: Determine Lighting Needs
Before you begin installing LED cabinet lighting, you need to determine your lighting needs, including the lighting location, the number of LED lights required, and the interior restaurant lighting requirements of the required power supply (driver).
You can determine the number of LED lights required and the driver load requirements with a simple calculation.
The calculation for the number of LED Lights per Power Supply.
(WATTS X QTY = TTL WATTAGE) +10% = MINIMUM REQUIRED WATTAGE OF POWER SUPPLY
(IE: 12 X M1 STEP LIGHTS =12W, 6 X RD7 CABINET LIGHTS =12W. TOTAL WATTAGE: 12+12 =24W + 10% =26.4W MINIMUM. MINIMUM 30W POWER SUPPLY IS REQUIRED.)
If dimming is required, make sure the LED lights purchased can be used with a standard inline dimmer or that you need a driver with dimming capability.
Step 2: Determine wires and fittings
Before you begin installing LED cabinet lighting, you need to determine the number, size and functional requirements of the wires needed. If the LED lights need to be installed outdoors, you will need to select the correct size of wear-set outdoor cords. If the installation is indoors, standard 18 AWG wire may be sufficient.
Basic LED lighting will be two wire (positive and negative), while RGB will be a four wire configuration (red, green, blue and negative) and RGBW will be a five wire configuration (red, green, blue, white and negative).
Step 3: Check local building codes and standards
Before proceeding with the installation of LED cabinet lighting, be sure to check local building codes and standards to ensure compliance. If you are unsure or need to make hardwired connections, then it is recommended that you consult or hire an electrical contractor.
Step 4: Plan LED locations and wiring
Before you begin installing LED cabinet lighting, the location of the LED lighting needs to be carefully planned and marked, with special attention to cut size, depth and wiring routing. You also need to make sure that the wiring is connected correctly to ensure safety. Depending on your needs, you can choose different installation methods and types of lighting.
Step 5: Install the LED lights
After planning the LED location and wiring, you can start to install the LED lights. Depending on your installation needs, you can choose from different installation methods, such as surface mount or recessed mount.
Step 6: Perform Testing and Adjustment
After the installation is complete, tests and adjustments need to be made to ensure that the lights are working properly and that the desired lighting effect can be achieved. If you need to adjust the light brightness or other parameters, you can use dimmers or other appropriate equipment.
In addition, the following are some other factors to consider when installing LED cabinet lighting:
1. Check the power supply
Before you begin installing LED cabinet lighting, make sure the power is off and disconnected from the power plug. If you are unsure how to safely turn off the power, consult a professional electrical contractor.
2. Pay attention to safety
During the installation process, be sure to stay safe from electric shock and other safety issues. Make sure you have turned off the power and disconnected the power plug before doing any work.
3.Consider lighting effects
In addition to lighting needs, you will need to consider the effects of LED lighting, including factors such as color, brightness and color temperature. If you’re not sure how to choose the best LED lighting for your needs, consult a professional electrical contractor or lighting specialist.
4. Consider using dimmers
If you need to use LED cabinet lighting in different scenarios and need to adjust brightness or other parameters, consider using a dimmer. This will give you more lighting options and provide a better lighting experience.
5. Regular maintenance
LED lighting requires regular maintenance to ensure it is working properly. After the installation is complete, clean the lights and cables regularly and replace accessories such as bulbs regularly. If you’re not sure how to perform maintenance, consult a professional electrical contractor or lighting specialist.
6.Choosing the right product
When selecting LED cabinet lighting products, make sure you choose products that meet your needs and requirements. Choose high-quality products to ensure their reliability and safety, and to avoid damage or failure. For this, we recommend some professional custom led light manufacturers.
These are all the steps to install cabinet lighting, if you have any questions or need custom led light, you can contact us anytime.
1. How do you hide wires under cabinet lights?
One way to do this is by bundling the wiring carefully and compactly into a bundle and then using tie wraps to hold it in place. You can then stick it to the underside of the cabinet using staples (being careful not to pierce the wiring and ruin all your hard work)
2. How do you lay out under cabinet lights?
If you want to install under-cabinet lighting as task lighting, place the strip lights closer to the middle front edge of the cabinets so that the countertop will be exposed to as much light as possible. You may want to place ambient or accent lighting closer to the back edge.
3. How are under-cabinet lights powered?
There are three ways to power under cabinet lighting: hardwire, plug-in, or battery. Hardwire means the lights are connected directly to a switch on the wall. You could have one switch for all of your under-cabinet lights or group them so that you can turn on different areas independently.
4. What cable for under cabinet lighting?
Although wire size ultimately depends on your light-fixture manufacturer’s specifications, 12-gauge wire is standard for most incandescent and fluorescent under-cabinet fixtures. A basic installation requires a 12-2 NM cable.
5. Do under-cabinet LED lights need a transformer?
Under cabinet lighting transformers is the power supply for all our under cabinet low voltage LED and Halogen lights. Without the transformer, your under-cabinet lighting system simply will not work.
6. Which way do you wire an LED?
The positive side of the LED is called the “anode” and is marked by having a longer “lead,” or leg. The other, negative side of the LED is called the “cathode.” Current flows from the anode to the cathode and never in the opposite direction.
7. Do under-cabinet lights go in front or back?
Under cabinet strip lights should be placed closer to the front edge of the upper cabinet. Under the cabinet, stick lights or linear lights should run lengthwise and place close to the front edge of the cabinet.
8. What is the best wattage for under-cabinet lighting?
For the lights underneath the hanging cabinets shining onto the work surface, 15 watts per meter is an ideal solution for this area.
9. What cable types are used for lighting?
A cable with 2.5mm2 cores is typically used for power circuits, and a cable with 1mm2 cores is typically used for lighting circuits.
10. Should under cabinet lights be warm or cool?
Consider implementing cooler lighting underneath kitchen cabinets for a focused task light for food preparation, but avoid using a cool-toned light as your main, ambient kitchen ceiling lighting idea to avoid the room looking harsh or cold, especially in a space with little natural light.