LED lights are a very popular lighting device because they are more energy efficient and longer lasting than traditional incandescent lights, and can be made in a wide variety of colors.
If you want to make custom colors on your LED lights, then you’ve come to the right place! In this article, we’ll show you how to make custom colors to make your LED lights more unique and personal.
First of all Most LED lights have three basic colors: red, green and blue.
By controlling the intensity and combination of these three colors, you can make any color. This is the RGB color mode.
LED lights use four basic colors of white (including cool white and warm white and other kinds of lighting white light), red, green and blue (R, G , B) LED bead chips, which are packaged in various forms, and each group of colors can be used separately and individually, and connected to the driver circuit and microcontroller respectively.
user can control the LED beads chip
2, the user can control the red, green, blue (R, G, B) three LED beads chip according to the principle of optical three primary colors (all colors can be mixed with three primary colors red, green, blue according to a certain ratio) to approximate the color of light visible to almost all eyes.
3, the user can through the cell phone app or the button on the lamp wired connection, the white, red, green, blue (R, G, B) four-color light beads chip into the brightness adjustment.
To make your favorite color, you need some tools and materials. First, you need some RGB LED lights. These can be purchased in many electronic parts stores or online stores.
You will also need a controller board and some wires to connect the LEDs to the controller. Finally, you will need some software to control the color of the LEDs.
There is of course a lot of software available to control the color of the LED lights. One of them is called Arduino IDE, which is a free open source software that helps you write and upload code to the controller board. Using the Arduino IDE, you can write code to control the color of the LEDs and create your own favorite color patterns.
Here is a sample of the underlying code of the kosoom software to help you start writing custom color code:
void setup() {// Initialization code}
void loop() {// Loop code
analogWrite(RED_PIN, 255); // Set the intensity of the red channel to the maximum
analogWrite(GREEN_PIN, 0); // set the intensity of the green channel to 0
analogWrite(BLUE_PIN, 0); // set the intensity of the blue channel to 0}
In the code above, you can see how to use the analogWrite function to control the intensity of each color channel. For example, in line 4, we set the intensity of the red channel to the maximum value (255), which means that the channel will emit red light. By adjusting the intensity of each channel, you can create your own favorite colors, and apply them to your own led track lighting design!
Of course, this is just an example. To create more complex custom color patterns, you will need to learn more about programming and circuit design.
Making custom color LED lights is a fun and useful skill.
Whether you want to use them for home decoration or commercial use. If you want to be an expert in the lighting industry, welcome to learn about kosoom and we will help you how to become a better creator and designer. We hope this article has been enlightening for you and wish you the best of luck!
