Choose the Right LED Lighting Solution

Choose the Right LED Lighting Solution

The light-emitting diode (LED) is the greatest energy-efficient and speedy lighting technology nowadays. LED lamps endure longer, are much more durable than equivalent incandescent lamps and can be significantly more efficient than most fluorescent lamps. The most efficient commercially available LED lamps have efficiencies of 200 lumen per watt (Lm/W). [1]

 

LEDs have replaced the traditional lighting for a multitude of reasons, the most notable of which being their longer lifespans, lower energy usage, and need for less maintenance. They are available in a range of styles and designs, so you can pick the right one designed to withstand various scenarios.

 

KOSOOM offers sophisticated LED lighting solutions with a wide portfolio of practical and stylish lighting options for any commercial space. This guide would explore what the LED lighting solution is right for you.

 

1 What is the most efficient form of lighting?

 

Traditional or incandescent light bulbs date back more than a century and are extremely inefficient. Only about 5% of the electricity they use converts into visible light. [2] What’s more, the bulbs don’t survive very long because the filament that creates the light evaporates as heat passes through it.

 

Halogen incandescent lights use the same filament technology as conventional bulbs but operate at a higher temperature, making them slightly more efficient. Inside of them is a capsule that traps gas around a filament to boost its efficiency.

 

Compact fluorescent lamps (CFLs) were among the first energy efficient bulbs available and use roughly 70-80% less electricity than the comparable traditional bulbs, as well as lasting almost 10 times longer.[3] CFL bulbs have a gas inside a glass tube that is charged with electricity until it glows.

 

Light emitting diodes (LEDs) have essentially replaced compact fluorescent lights (CFLs) because they are even more efficient, turn on quickly at maximum brightness, and can fit almost any light fixture.

 

Due to their massive reduction in energy consumption, LEDs have become the most popular and simply the first choice in almost every lighting scenario. LEDs were first invented in 1927, becoming commercialized at scale in the 2000s and have continued to advance ever since.

 

Light emitting diodes (LEDs) have largely replaced CFLs, which are more efficient still, turn on instantly at full brightness, and are available to fit virtually any light fixture in the home. LEDs produce light from the electricity flowing through them.

 

Within a bulb, you will find a large number of LEDs to create sufficient brightness. LEDs use much less energy to provide the same amount of light as other forms of lighting. One of the main reasons LEDs are so efficient is that most of their energy is used to solely create light, rather than creating light and heat.

Energy efficient LED lighting reduces electricity bills and carbon dioxide emissions, without reducing the quality of light in our homes. The most popular and flexible lighting option, LEDs may replace spotlights and dimmable lights. Additionally, LEDs use less energy than CFLs.

 

2 What factors increase LED performance?

 

The following critical requirements are partially performance related, partially reliability related for LED drivers:

  • Performance related expectations:
  • High efficiency is essential for energy saving
  • Dimming feature can greatly enhances the energy saving features
  • Reliability related expectations:
  • High Reliability is critical to minimizing maintenance cost
  • Long lifetime is compatible with the anticipated lifespan of the LEDs

 

Temperature increase has a significant impact on the efficiency and color stability of LEDs. In general, the performance of LEDs is interdependent upon the thermal, optical, and control system applied. The goal in efficient lighting design is to optimize the amount of electrical power that is transformed into light energy.

 

Temperature has a significant impact on the properties of LEDs, including chromaticity and luminous efficiency, which vary greatly from device to device due to manufacturing variability.

 

To reach accurate conclusions when choosing an LED for an application, it is critical to evaluate the LED based on the actual operating conditions and not just datasheet values.

 

3 What are the problems with LED lights?

 

You might have encountered defective or inefficient LEDs in your space, and you’re frustrated over the lost savings and claimed long term benefits. You ought to be aware that LED technology is sensitive, evolving, and it is not merely a matter of selecting the cheapest option on the market. Rigorously tested and certified LED products to serve you a long time when used correctly. After all, you get what you pay for.

 

One of the most prevalent and frequent problems with LEDs is flicking. In this instance, the LED lamps occasionally flickers while sometimes it happens randomly. The most common reasons for this are poor capacitors or insufficient wattage. To resolve this issue, you need to check the socket. If the socket is fine, you can replace the bulb or vice versa.

Another typical problem with the LED Lighting is buzzing sound. It’s usually because of overload in the circuit. If your LED bulb is receiving slightly higher voltage, it’ll produce a humming sound instead of blowing off. The best solution is to compare the voltage that runs through your socket with what your bulb or lamp accepts. It’ll most probably solve the problem.

 

LEDs can occasionally shine too brightly for comfort. If your light bulb has a switchable dimming feature, install it. Alternately, select a fixture that will shield your eyes from additional light.

 

A dim LED, on the other hand, can be quite annoying. It usually occurs either when the LED gets too old or when it’s improperly designed. LEDs have a life span, so before dying out completely, it’s normal to lose brightness.

 

Here concludes our list of common LED-related problems that you might encounter. We have tried to cover almost every issue out there. The best option is to contact a technician if you face some other problem.

 

However, if you want to avoid the aforementioned problems, you should choose us KOSOOM as a branded LED lighting solution provider with the correct wattage, size, and drivers, which would ensure longer and issue-free usage.

 

4 What technology will replace LED lights?

 

The lighting sector has seen the emergence of many new technical innovations in the last few years. But, the dynamic developments in 2023, which would play a significant role and alter the trends of the future, would be witnessed very soon.

 

We can now use our smart devices to remotely control our lighting fixtures thanks to the Internet of Things. This implies that you may now turn lights on and off from anywhere with the help built-in sensors that connect to your smartphone or computer.

 

Furthermore, built-in lighting sources boosted by LED technology is becoming the new lighting trend. That’s because LED lights don’t require frequent replacements. Manufacturers are fitting lights inside the ceiling and walls to make them appear as seamless as possible. The designers are coming up with ideas that incorporate lighting fixtures.

 

Apart from these trends, there are a ton of other lighting trends available and many more are coming, making the lighting industry as a whole a veritable gold mine for innovations.

 

 

About Us


If you have LED lighting needs for supermarkets, shops, offices, restaurants, etc., you can click here to view our products.

 

From program planning to technical assistance for lamp installation and commissioning, KOSOOM can provide you with free consultation and design services. We offer a robust product supply chain, a full product range, online service support that responds within 24 hours, and faster delivery. All of our products have also passed CE and ROHS certification.

 

 

Reference

 

[1] https://en.wikipedia.org/wiki/LED_lamp

[2] https://www.hampshirelight.net/blog/the-evolution-of-energy-efficient-lighting

[3] https://www.chil.uk.com/electricity/led-lighting

Back to blog
1 of 3

Related recommendations